Advanced programmings and registrations
Programming further clerk functionsThis section explains how you can set further programming for clerks such as setting the register in training mode or setting commission rates given to clerks. In the training mode, the register operates normally but the results will not be stored in the memory. You can use this feature for getting to know the operations of the cash register for yourself or for newly hired clerks.
Step
1
2
3 Enter 2
Operation
>▪▪▪▪▪>F 3o
1007o
(Clerk no.)
4 Referring the following tables, input the set code you wish to program and press okey. The example on the right is for setting a commission rate.
5 Enter the program code and press Fkey. The example on the right is for setting 8.5% to commission rate 1 and 5% to commission 2.
6 If you wish to set the same program to the next clerk number, perform the step 5 again. When you set to another clerk (not next clerk number), repeat steps 3 through 5.
5 Press okey to complete the settings.
Set code 67 (Training mode)68o
(set code)
08500500F
(program code)
o
features Useful
Description | Selection | Program code |
Training mode | No = 0 | B |
| Yes = 1 | D6 |
Must be “00000” |
| ººººº |
|
| D5 D4 D3 D2 D1 |
Example 1: To set the clerk number 15 as a clerk being trained.
Press 3o1507o100000Fo
Set code 68 (Commission rates)
| Description | Selection | Program code |
Commission rate 1 | (integer) | 00 to 99 | BB |
|
|
| D8 D7 |
Commission rate 1 | (decimal) | 00 to 99 | BB |
|
|
| D6 D5 |
Commission rate 2 | (integer) | 00 to 99 | BB |
|
|
| D4 D3 |
Commission rate 2 | (decimal) | 00 to 99 | BB |
|
|
| D2 D1 |