Advanced programmings and registrations
Programming functions of PLUs individuallyThis part explains programming methods of each function of PLUs individually.
Step
1 Turn the Mode switch to PGM position and select [System Setting] then press Fkey.
2 Enter 3and press okey to set the register in the programming mode.
3 Referring the tables in the proceeding section, enter two- digit set code you wish to program followed by two 6s. The “66” is the identification code for individual programming of departments and PLUs. Then press okey.
4 Enter PLU number you wish to set and press PLU/S.DEPT key.
Operation
>▪▪▪▪▪>F 3o
BB66o
(set code)
0005 PLU/S.DEPT
|
| This example is for setting a program in PLU |
|
| 0005. |
5 | Referring the table in the preceding section, enter program | B▪▪▪▪▪BF |
6 | code and press Fkey. | (Program code) |
If you wish to set the same program code in the next PLU | F | |
| number, press Fkey again. |
|
| Perform step 5 if you wish to set another program code to |
|
| the next PLU number. |
|
| To program in another PLU number (not next PLU number), |
|
7 | repeat steps 4 and 5. |
|
Press okey to complete the settings. | o |
Example 1: To set PLU 0001 as “Open PLU”.
Press 3o0466o0001 PLU/S.DEPT 4Fo
Example 2: To set PLU0012 to link item group 12 and dept. 04.
Press 3o1166o0012 PLU/S.DEPT 0120004Fo
features Useful