Sampling Sounds and Playing Them on the Digital Keyboard

Protecting Against Accidental Deletion of

Sampled Sounds

You can use the following procedure to protect each sampled sound against accidental deletion.

1.Press bp and then use bs (10-key) to enter the tone number of the sampled tone you want to protect.

2.Press ct and then use the bs (10-key) [4] () and [6] () keys to display “SAMPLING” (page E-6).

3.Press the bs (10-key) [7] (ENTER) key.

4.Use the bs (10-key) [4] () and [6] () keys to display “Protect”.

P r o t e c t

5.Press the bs (10-key) [+] key to turn on protection.

Once protected a tone cannot be deleted.

A protected tone is indicated as shown below.

Protected

*1 : O r g n l

Saving Sample Data on an External Device

• SD memory card (WK-500 only) (page E-61)

• Computer (page E-68)

Maintaining Sampled Sound Data in Memory

After you save sampled sound data in memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, sampled sound data will be deleted.

Tips for Maintaining Data

Use both batteries and the AC adaptor together.

Make sure that batteries with sufficient power are loaded whenever you disconnect the AC adaptor.

Connect the AC adaptor to the keyboard and plug it into a power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or replacing batteries, first press 1 to turn off power.

E-24