Recording Your Keyboard Play

 

To record to Tracks 1 through 6

6. Repeat steps 2 through 5 to record the other

 

 

tracks.

 

 

 

 

 

 

1. Record the first part to Track 1.

7. After you finish recording all of the tracks,

 

To record to Track 1, perform steps 1 through 4 under

 

“Recording and Playing Back Keyboard Play” (page

press bm.

 

E-48).

This will start playback of the recorded tracks. Press bm

 

 

Lights

 

to stop or restart playback.

 

 

At this time you can turn off playback of specific tracks

 

 

 

 

 

 

 

 

 

 

 

 

 

using buttons bt to co. Pressing a key toggles playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

of each track on (track number displayed) or off (track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

number not displayed).

 

 

 

 

 

 

If you want to re-record a track, press 5. This will

 

 

 

 

 

 

 

 

 

 

 

 

 

return to step 2 of the above procedure. Only the tracks

 

 

 

Lights

 

that are turned on (displayed) above will play as you

2. Press 5.

 

re-record.

Example: Tracks 2 and 3 selected

 

This will enter record standby.

 

 

Disappears

 

 

 

 

 

 

 

 

 

 

Flashes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8. Press 5 twice to exit the recorder mode.

Flashes

3.Press a button from ck to co to select the track number of the next track to which you want to

record.

 

 

 

 

 

 

 

 

This will enter record standby for the track you selected.

 

Disappears

Example: Track 2

 

 

 

 

 

Flashes

To delete a recorded track

 

After step 3 of the above procedure, do hold down 5 (without

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressing any keyboard key) until the message “Tr.Del?”

 

 

 

 

 

 

 

 

 

 

appears on the display. Press [+] (YES) to delete the track, or

 

 

 

 

 

[–] (NO) to cancel the delete operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flashes

 

 

 

 

If you want to use a different tone than the one you used in Track 1, press bp and then use bs (10-key) to input the tone number.

4.Press bm.

This will start playback of what you recorded up to this point in other tracks and record what you play on the keyboard to the currently selected track. Play the notes you want on the keyboard.

5.To stop recording, press bm.

To play back what you have recorded, press bm again. Each press of bm starts and stops playback.

E-50

B