Casio WK-500, WK200 Loading Data from an SD Memory, Card into Digital Keyboard, Memory, folder, Do this, of data, To load this data, Display this screen

Using a Memory Card (WK-500 Only)

											Loading Data from an SD Memory
• You can input the following characters in a file name.											Card into Digital Keyboard
											Memory
	0	1	2	3	4	5	6	7	8	9
											Use the following procedure to load data from an SD memory
	A	B	C	D	E	F	G	H	I	J
											card into Digital Keyboard memory.
	K	L	M	N	O	P	Q	R	S	T
	U	V	W	X	Y	Z	S	&	_	'
											• Whenever you copy a file to the SD memory card that
	(	)	-	^	{	}	@	~	`
											you plan to recall on the Digital Keyboard, be sure to
• The Digital Keyboard displays the “~” character as “3”.
											store the file in the SD memory card’s “MUSICDAT”
											folder.

■SD Memory Card Data (File) Storage Locations

The above procedure stores Digital Keyboard data in a folder		1. On the Digital Keyboard, select the data you
named “MUSICDAT” on the SD memory card.		want to load as described below.
• The “MUSICDAT” folder is created automatically when you
	format the SD memory card on the Digital Keyboard (page	To load this type	Do this
	E-60).	of data
•	If you store a file in any location other than inside the	Sampled sound	Select the tone number of the sampled
	“MUSICDAT” folder, you will not be able to recall, delete, or
			sound you want to load.
	play the file on the Digital Keyboard. You also will not be
		User rhythm	Select the rhythm number of the user
	able to recall, delete, or play any file you store inside of a
			rhythm you want to load.
	subfolder you create inside the “MUSICDAT” folder.
•	The message “No File” will appear on the display if you try	User song	Select the song number of the song you
	to perform a recall, delete, or play operation while there is		want to load.
	no file inside the “MUSICDAT” folder.
		Recorded song	Select the song you want to load and
			put the Digital Keyboard in playback
			standby.
		User scale	Press bq and then 4.
		memory
		Registration data	Select one of the Digital Keyboard’s
			default built in tones, songs, rhythms,
		All data
			etc.

2. Insert the SD memory card that contains the data into the Digital Keyboard’s card slot.

3. Hold down dk until the button lights.

• To cancel data load, press dk again.

4. Use the bs (10-key) [4] () and [6] () keys to display one of the settings shown below.

• You also could use [–] and [+].

To load this data	Display this screen
Sampled sound	“Lod” “SmplTone”
User rhythm	“Lod” “UserRhy.”
User song	“Lod” “UserSong”
Recorded song	“Lod” “Rec.Song”
User scale memory	“Lod” “ScaleMem”
Registration data	“Lod” “Regist.”
All data	“Lod” “All Data”

E-62