When using two or more projectors in the same location (same meeting room, etc.), each one is identified by a unique SSID (service set identifier) that lets each computer keep track of which projector it is connected to.
The initial default SSID for the projector is casiolpj_default1. If there are two projectors being used at the same time in the same location, for example, the SSID of the second projector must be changed to casiolpj_default2 or casiolpj_default3, which are the other two available default SSIDs.
To change the default SSID of a projector
1. Press the [INPUT] key and select “Wireless” as the input source.
This will project the Wireless standby screen.
2.Press the [MENU] key.
3.Use the [] key to move the highlighting to “Wireless” and then press the [ENTER] key.
4.Use the [] key to move the highlighting to “Change SSID” and then press the [ENTER] key.
This displays a dialog box like the one shown below for changing the SSID.
5. Use the [] and [] keys to move the highlighting to the SSID you want to select and then press the [ENTER] key.
6. To close the dialog box, press the [ESC] key.
16