Problem | Cause and Required Action | Refer to: | |
Wireless Connection 3 is | Make sure all of the projectors are turned on. A | – | |
running on my computer, | projector can be recognized by a computer even if |
| |
but the Projector List | “Wireless” is not selected as the projector’s input |
| |
dialog box won’t display. | source. |
| |
| Make sure that all of the projectors have wireless |
| |
| adapters installed (page 39). |
| |
| If the projectors and computer are far away from each |
| |
| other or if there is wall or some other physical |
| |
| impediment between them, move them closer and/or |
| |
| remove the impediment. |
| |
| If a nearby microwave oven, Bluetooth device, or other |
| |
| device is interfering with the wireless LAN signal, |
| |
| relocate the interfering device. |
| |
|
|
| |
The SSID of the projector | Check the “SSID Broadcast” setting of the projector. If | ||
I want to connect to is | “Disable” is selected, change the setting to “Enable”. | ||
not included on the |
| ||
Projector List dialog box. |
| ||
| If the projector is off, turn it on. |
| |
|
|
| |
Even though entering the | If there are two or three projectors, make sure that | ||
login code displayed on | each one has a different SSID: casiolpj_default1, | ||
the Wireless standby | casiolpj_default2, casiolpj_default3. | (page 16) | |
screen, I get a “Could not | If there are more than three projectors, assign each | ||
connect to projector. | one a unique SSID. In this case you can use the | ||
Connection has been | |||
default SSIDs for three of the projectors and configure |
| ||
terminated.” error. |
| ||
security settings for the remainder of the projectors to |
| ||
|
| ||
| assign original SSIDs. |
| |
|
|
|
42