Casio XJ-A235V Error Messages, System Admin Page Error Messages, Wireless Connection 3 Error Messages

Error Messages

Wireless Connection 3 Error Messages

Error Message	Cause and Required Action
Could not connect to	 The wrong login code was entered when establishing a wireless LAN connection
projector. Connection has	with a projector configured with default settings. Clicking the [OK] button on the
been terminated.	error message will return to the login code input dialog box, so enter the correct
	login code. If you do not know the login code, check the projector’s Wireless
	standby screen (page 11).
	 The wrong passphrase (or WEP key) was entered when establishing a wireless LAN
	connection with a projector configured with security settings. Clicking the [OK]
	button on the error message will return to the passphrase/WEP key input dialog
	box, so enter the correct passphrase or WEP key.
	If you forgot the passphrase or WEP key that is assigned to the projector,
	reconfigure security settings. For more information, see “To configure security
	settings” (page 21).

System Admin Page Error Messages

Error Message	Cause and Required Action
Enter the correct	The wrong password was entered when logging in to the projector’s System Admin
password.	page from a computer. Clicking the [OK] button on the error message will return to the
	password input screen, so enter the correct password. The default password, if you
	have not changed it yet, is “admin”.
	If you forgot the password you assigned using the System Admin page, perform the
	procedure under “To initialize the Wireless setup” (page 31).

	Important!
	Initializing the Wireless setup returns all Wireless settings, including security
	settings and all other System Admin page settings, to their initial factory
	defaults.
Enter a different SSID to	You cannot use the “Setup” screen of the System Admin page to change the setup of
change wireless settings.	the three default SSIDs (casiolpj_default1, casiolpj_default2, casiolpj_default3). If you
	want to use different settings, you need to enter a different (non-default) SSID into the
	“SSID” text box before you click [Apply].

Note

For information about error messages that appear on the projection screen, see the User’s Guide (UsersGuide_English.pdf).

44