Installing Wireless Connection 3

1. Place the CD-ROM that comes with the projector into your computer’s CD-ROM drive.

This will automatically display the CD-ROM menu screen.

2.On the menu screen, click the [Install] button to the right of “Wireless Connection 3”.

Follow the instructions on the dialog boxes that appear on the screen.

If you are running Windows 7 and the “User Account Control” message appears while installing, click [Yes].

If you are running Windows Vista and the “User Account Control” message appears while installing, click [Allow].

If you are running Windows XP and message shown below appears while installing, click [Continue Anyway].

Note

After you install Wireless Connection 3, it will start up automatically and start searching for a projector. If you want to establish a wireless LAN connection between the computer and projector at that time, perform the procedure under “To use a default SSID to connect a computer to the projector via wireless LAN” (page 14). If you do not want to establish a connection, click the close button in the upper right corner of the Wireless Connection 3 window.

Installing Wireless Connection 3 on a Second and Subsequent Computers

You can use the Wireless Connection 3 token wizard to install Wireless Connection 3 on USB memory. Then you can plug the USB memory to the USB port of any computer and start up Wireless Connection 3 from there. This means it is not necessary to install Wireless Connection 3 from the CD-ROM on each computer that will connect with the projector over the wireless LAN.

For more information, see “Using the Token Wizard” (page 37).

9