Getting Ready

Setting Up the Projector

Locate the projector on a desk, table, or stand that is firm and level. Make sure to allow sufficient space around the sides and back of the projector for proper ventilation.

zThe following illustrations show how the projector should be oriented for optimum projection relative to the screen.

Viewed from Above

Screen

The center of the projector’s lens should be aligned with the horizontal center of the screen.

Viewed from the Side

Screen

Make sure the projector is at a right angle to the screen.

zYou can place the projector on a surface that is angled up to 30 degrees upwards or downwards during use. Never locate the projector on a surface that is angled more than 30 degrees, or angled at all to the left or right. Such conditions can cause the lamp to explode or can shorten lamp life, and also creates the risk of malfunction.

zThe projector’s auto keystone correction range is 0 to +30 degrees. If the surface you are projecting onto is angled downwards from horizontal, use manual keystone correction (page E-25) to correct the image.

E-14