Casio XJ-S31, XJ-S36, XJ-S41, XJ-S46 See, Problem, Source”), under “Indicators”, correct the problem, Indicator/Error Message, Cause and Recommended Action, Description and Required Action

Troubleshooting

Indicator/Error Message		Description and Required Action
POWER	: Amber flashing	The allowable life for the lamp has been exceeded, and the
	Red steady	projector will not turn on. Replace the lamp following the steps
TEMP	: –	under “Replacing the Lamp” (page E-29).
LAMP	: Red steady
Message : The lamp has
	exceeded its service
	life! The projector will
	not turn on until you
	replace the lamp.

Projector Troubleshooting

Check the following items whenever you experience any problem with the projector.

Problem	Cause and Recommended Action	See
The projector does	If the POWER/STANDBY indicator is not lit, the AC	page E-20
not turn on when I	power cord may not be connected correctly.
press the [ ]	➔ Make sure the AC power cord is connected
(power) key.	correctly to the projector and the power outlet
	(see “Turning On the Projector”).
	If the TEMP or LAMP indicator remains flashing or lit,	page E-34
	it means some type of error has occurred.
	➔ See “Error Indicators and Warning Messages”
	under “Indicators”.
The projector does	The connected computer or video device may not be	—
not project any	turned on, or it may not be outputting a video signal.
image from the	➔ Make sure the connected computer or video
connected device.	device is turned on, and perform the required
	operation on it to output a video signal.
	The correct input source is not selected on the	page E-23
	projector.
	➔ On the projector, select the input source that
	corresponds to the device whose image you are
	trying to project (see “Selecting the Input
	Source”).
The projector does	Images may not project correctly when you have the	page E-17
not correctly project	component output terminal of a video device
the image from the	connected to the RGB terminal of the projector.
connected device.	➔ Try using the projector’s AV terminal (see
	“Connecting to a Standard Video Device”).
When RGB/	The wrong option (“Component” or “RGB”) may be	User’s Guide
Component is	selected for the “Input Settings RGB Input” setting	(UsersGuide_
selected as the input	on the setup menu. The image will not be projected	English.pdf)
source, the color of	correctly if “Component” is selected while the
the projected image	projector’s RGB input terminal is connected to the
or the image itself is	RGB output terminal of a computer, or if “RGB” is
abnormal.	selected while the projector’s RGB input terminal is
	connected to the component video output terminal of a
	video device.
	➔ Use the setup menu to change the “Input
	Settings RGB Input” setting to “Auto” to
	correct the problem.

E-38