General Guide
Replacing the Remote Controller Battery
Before you can use the remote controller for the first time, you need to load the battery that comes with it.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
Caution TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Misuse of a battery can cause it to leak and stain the area around it, or to explode, creating the risk of fire and personal injury. Make sure that you
Caution always observe the following precautions.
z Take care that the battery is oriented correctly when you load it.
z Use only battery type that is specified for use with the remote controller.
1. Hook your fingernail on the groove of | 2. Place the battery (CR2025) onto the |
the battery holder on the back of the | battery holder. |
remote controller. While holding down | z Make sure that the plus (+) side of the |
the release on the side (1), pull out | battery is facing upwards (so you can |
the holder (2). | see it). Take care that you do not |
| install the battery upside down. |
1
2
English
3. Replace the battery holder back into the remote controller.