Connecting a USB Device to the Data Projector
What happens when you connect a USB device to the Data Projector depends on the current configuration of the Data Projector’s
Turning On the Data Projector after Connecting a USB Device
Normally when you turn on the Data Projector without a USB device connected, the Data Projector will check the RGB terminal and then the VIDEO terminal for a signal. If it finds a signal, the Data Projector will select it automatically and project the signal contents.
If you turn the Data Projector on while a USB device is connected to its USB port, it will perform one of the following operations (depending on its current
When
When this type of device is | The Data Projector does this automatically when turned on: | |
connected: | ||
| ||
USB memory device or USB | Starts up Viewer (page 27) and projects the Viewer screen. | |
card reader with memory card |
| |
loaded |
| |
|
| |
Starts up Wireless and projects the Wireless screen. | ||
|
| |
Checks the RGB terminal and then the VIDEO terminal for an | ||
Camera | input signal. If it finds a signal, the Data Projector will select it | |
| automatically and project the signal contents. Note that the | |
| Document Camera is not detected automatically. | |
|
|
When
Turning on the Data Projector with a USB device connected while
8