Performing a Presentation using a Wireless LAN

(Projecting Computer Screen Contents Over a Wireless LAN)

Wireless LAN lets you establish a connection between the Data Projector and a computer without using a cable, and project the computer’s display contents with the Data Projector.

Important!

zNote that only shots of your computer screen can be sent from your computer to the Data Projector over a wireless LAN connection. Audio data cannot be sent.

zThe procedure below assumes that the Data Projector’s plug-and-play feature is turned on (which is the initial default setting). If you have turned off plug-and-play, turn it back on before performing the procedure below. For details about configuring plug- and-play settings, see “Setup Menu Contents” in the User’s Guide that comes with the Data Projector.

zIf you are running Wireless Connection 2 under Windows Vista, do not perform any of the operations that display the “User Account Control” message (such as software installation, new hardware connection, etc.) while there is no connection between the computer and Data Projector.

Requirements for Wireless LAN Connection

The following devices and software are required to establish a wireless LAN connection between the Data Projector and a computer.

1 Projector..... 1

Prepare a CASIO Data Projector that supports wireless connection* or a CASIO YP-100 Multifunctional Presentation Kit. If you are using the XJ-S35 or YP-100, be sure to read “Establishing a Wireless LAN Connection between the XJ-S35/YP-100 and a Computer” (page 7).

*For details about applicable products, visit the website at the following URL: http://world.casio.com/projector/support/en

2CASIO YW-2 Wireless Adapter .... 1

A YW-2 Wireless Adapter must be connected to the Data Projector for wireless receipt of computer display data.

3Computer(s) with Wireless LAN Function (IEEE 802.11b Standard).....1 to 4 Either of the following is required.

Computer(s) with built-in wireless LAN adapter(s)

Computer(s) with commercially available wireless LAN adapter(s) installed

4Wireless Connection 2

Install Wireless Connection 2 on the computer(s) described in 3 above. For details about installation, see the YW-2L Wireless Adapter User’s Guide.

6