3 Turn on your computer and start up Windows.
4 On your computer, start up Wireless Connection 2.
z If your computer is running Windows Vista, starting up Wireless Connection 2 will cause the “User Account Control” message to appear. When it does, click “Allow”.
z If the “Select Network” dialog box like the one shown below appears, click the wireless LAN adapter you want to use for connection with the Data Projector and then click the [OK] button.
z If your computer is running Windows XP or 2000, do not select the “Connect to an existing network” check box.
9

Using a Simple Connection Profile for a Wireless LAN Connection between the Data Projector and a Single Computer

The following procedure uses the preset Simple Connection 1 connection profile to establish a wireless LAN connection between the Data Projector and a single computer for the first time.

To establish a wireless LAN connection between a single computer and the Data Projector

1

2

Turn on the Data Projector.

zWait until the Data Projector’s POWER/STANDBY indicator is lit green.

Connect the CASIO YW-2 wireless adapter to the Data Projector’s USB port.

zYou also can connect the wireless adapter to the Data Projector before turning on the Data Projector.

zThe Data Projector will detect the wireless adapter and start up its Wireless function automatically. The message shown below will appear in the projection area.

Check to make sure that “Simple Connection 1” is shown.