Starting Up and Exiting Wireless Connection 2

To establish a wireless LAN connection between a computer and the Data Projector, Wireless Connection 2 must be running on the computer.

To start up Wireless Connection 2

Perform either of the following operations to start up Wireless Connection 2 on the computer.

Double-click the icon on your Windows desktop.

On your computer’s Windows Start menu, select [All Programs] - [CASIO] - [Wireless Connection 2].

Important!

If your computer is running Windows Vista, starting up Wireless Connection 2 will cause the “User Account Control” message to appear. When it does, click “Allow”.

To exit Wireless Connection 2

Perform either of the following operations.

On the Wireless Connection 2 window, select [Connection] - [Exit].

Click the [×] button in the upper right corner of the Wireless Connection 2 window.

Limitations on Wireless LAN Connection Using Wireless Connection 2

The restrictions described below apply whenever using Wireless Connection 2 for wireless LAN connection.

zWhen using Wireless Connection 2 for wireless LAN connection with a previous projector model (XJ-S35 or YP-100), local conditions may result in unstable connection or even make connection impossible. Supplementary information is available on the CASIO website at: (http://world.casio.com/projector/support/en/)

zIf your computer is running Windows Vista, the wireless LAN connection data rate may slow down if you have Windows Aero™ enabled. If this happens, disable Windows Aero™.

8