Troubleshooting, 1Checking the problem first

Troubleshooting

1Checking the problem first

Before suspecting the failure of the unit, check the fol- lowing point:

No display on screen at all.

Display is unusual.

Check if the batteries have run short.

Replace all of four batteries with brand-new ones.

Beep would not stop.

Have you set your age correctly?

Setting of age will automatically set the upper pulse limit. Set your correct age.

The progress to target has been reached quickly. Have you set the target time or target calorie?

Set the values in accordance with your exercise pro- gram.

No display of heart rate on screen

Have you set the earlobe sensor of pulse sensor cor- rectly?

Set the sensor at the center of your earlobe.

The sensor should be set after removing earrings

Is the pulse sensor plug firmly connected?

Insert the plug correctly.

Has the pulse sensor been damaged?

Check the pulse sensor according to the check proce- dure.

If it is found damaged, replace it with a brand-new one. Unusually high heart rate is displayed.

Check the pulse sensor according to the check proce- dure.

If it is found damaged, replace it with a brand-new one.

2Limited warranty

•Cat Eye Co., Ltd. guarantees that the Cateye Ergociser Model EC-8000 is free from material defects and malfunc- tions, for a period specified in the separate Warranty Card. In case there should be defects or malfunctions under cor- rect and normal personal use, Cat Eye will repair or re- place the unit or parts, according to the terms and condi- tions mentioned in the Warranty Card.

•If repair service is required, contact the dealer where you purchased the unit.

•The warranty covers only the main resistance unit and the control panel. Accessories such as pulse sensor, and me- chanically consumable parts are not covered.

Specifications

Load:		Eddy current system utilizing permanent magnet
Load adjustment: 8-step adjustment by using manual lever

Load range:		approx. 10 - 240 watts (subject to pedal cadence)

Acceleration:		2-step acceleration by using a V-rib belt

Control system: 4-bit microcomputer

Display:		LCD

Display function:
	Function		Range	Accuracy

	Heart rate		50-220 /min	±1bpm (stable state)

	Cadence		40-80 rpm	9-step graph

	Elapsed time		0min00sec-99min59sec	±0.003%

	Work rate		0-999 watts	±5watts at 50watts

	Calorie consumption		0-999 kcal	Estimated value

	Progress to target		remaining 8/8-0/8	8-segment graph

	Pedal resistance		1-8 levels	8-segment graph

	Screen display		Display in input screen or exercise screen

	Heart mark		Blinks to heart rate

	Battery mark		Illuminates when batteries run short

	Error mark		Illuminates when fails to detect the pulse sen-

		sor signal
	Pulse sensor OK mark Illuminates at the time of pulse sensor test

	Setting function

	Age	10-99 years of age (initial value: 40)

	Target time	0-99 min. (initial value 20)

	Target calorie	0-999kcal (initial value 0)
		*Either of target time or target calorie can be set.

	Upper pulse limit	Automatically set (200–age) by inputting the
		value for age.

*Setting can be changed by operating a button.

Alarm function

Upper pulse limit alarm: Beep sound when the heart rate exceeds

preset upper pulse limit

Target achievement alarm: Beep sound when the target time or tar-

	get calorie setting has been reached.
Power supply:	AA(R6) x 4

Battery life:	Approx. 200 hours (by alkaline batteries)

User's weight limit: 286 lbs (130 kg)

Measurement:	22-1/16 x 51-31/32 x 39-25/32” max
	(560 x 1320 x 1010 mm)

Weight:	approx. 68 lbs (31 kg)