Setup Instructions
Follow the steps below to successfully set up your Cavalry External Hard
Drive with your computer. You will need the Resources CD. Any PDF guide
referenced in the Resources CD can be found online at:
www.cavalrystorage.com/manuals.htm
Step 1. Start your computer and wait for Windows or the Mac OS to load
completely.
Step 2. Make sure the right voltage (115V or 230V) is selected on the back
of the drive: set the switch to 115V if you live in North America. Most other
regions should use the 230V setting instead. However still please check
carefully before using the drive. Then connect the power cord to the drive.
Plug the power cord into an electrical outlet.
99