Administrator Tools
Cloning
This feature allows you to save your printer settings in a clone file. You can use the clone file to copy your printer settings to another printer, or use it to back up and restore settings on your own printer.
Note: If you are using the clone file to copy your printer settings to another printer, both printers must be the same model, and have the same version of software.
Note: Optional features can only be cloned if installed on both printers. To determine the Software Version of your printer:
1.In CentreWare IS, click Properties > General Setup > Configuration Report.
2.Scroll down to Software Versions.
Creating a Clone File
Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing CentreWare IS on page 17.
1.In CentreWare IS, click Properties > General Setup > Cloning.
2.Under Create Clone File select the features that you want to clone to other printers. All features are selected by default. You can select any of the following features to clone:
• | Accounting | • | Security |
• | Administration | • | SMart eSolutions |
• | Audit Log | • | System Disk |
• Authentication & Authorization Configuration | • | Power Saver | |
• | Connectivity | • | Print Settings |
• | Emails | • | Device Upgrade |
• | Fax | • | Workflow Scanning |
• | Internet Fax | • | Templates |
• | Internationalization | • | Web Services |
• | Job Management | • | Banner Sheet Settings |
Note: To view the specific parameters that can be cloned for any of the features, click View Feature Details.
3.Click Clone.
The Cloning Instructions page displays.
4.Under Cloning Instructions,
5.Click Save Link as or Save as and select a name and the location to save the file.
Note: The default name for the file is Cloning.dlm. If you rename the file, make sure the new name uses .dlm as the file extension.
6.Click Save.
WorkCentre 7755/7765/7775 Multifunction Printer | 161 |
System Administrator Guide |
|