Xerox 7775, 7765, 7755 manual Setting the Date and Time in CentreWare IS

Models: 7755 7775 7765

1 185
Download 185 pages 13.21 Kb
Page 155
Image 155

Administrator Tools

Setting the Date and Time

Setting the Date and Time in CentreWare IS

Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing CentreWare IS on page 17.

1.In CentreWare IS, click Properties > General Setup > Date and Time.

2.Under Date and Time Setup, select:

Automatic using NTP to use an NTP server.

Manual (NTP Disabled) to manually set the time.

3.If you are using an NTP server, provide the following information about the server:

Select an address type. Options are IPv4 Address or Host Name.

Type the appropriately formatted address, alternate address, and port numbers.The default port number is 123.

Note: Changes to these settings will cause the printer to restart.

4.Select the date and time format, and type the date and time in the appropriate fields. Select Display 24 hour clock to show the time in 24 hour format.

5.Under Time Zone, select your Time Zone from the drop-down menu.

6.Click Apply.

Setting the Date and Time at the Control Panel

Note: If your printer is locked, you must log in as a system administrator. For details, see System Administrator Access at the Control Panel on page 15.

1.At the printer control panel, press the Machine Status button, then touch the Tools tab.

2.Touch Device Settings > General > Date and Time.

3.To set the time zone, touch GMT Offset and touch the arrows to adjust the time zone.

4.To set the date, touch Date, select a Format and type the date.

5.To set the time, touch Time, and type the time. Select Display 24 hour clock to use 24 hour format.

WorkCentre 7755/7765/7775 Multifunction Printer

155

System Administrator Guide

 

Page 155
Image 155
Xerox 7775, 7765, 7755 manual Setting the Date and Time in CentreWare IS, Setting the Date and Time at the Control Panel