CDA SV410 manual Cleaning and Maintenance, General Advice

Models: SV410

1 20
Download 20 pages 8.45 Kb
Page 14
Image 14

Cleaning and Maintenance

GENERAL ADVICE

Important:

Always unplug the appliance before carrying out any maintenance repairs.

Do not use a steam cleaner because the moisture can get into the appliance thus can make it unsafe.

STAINLESS STEEL AND ALUMINIUM PARTS AND SILK- SCREEN PRINTED

SURFACES

Clean using an appropriate product. A CDA cleaning cloth is available for use on stainless steel and glass.

Always dry thoroughly.

IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abrasion. You are advised to use a soft cloth and neutral soap.

Maintenance - After Every Use

Once the steam generator on the base of the oven has cooled, wipe out the cavity with a dry cloth. Alternatively, allow the cavity to dry out by leaving the door open.

Monthly Maintenance

1.Unscrew the water supply tube and remove from the cavity. Remove any limescale that may have formed on the inside. This can be done using an object with a small point, such as a skewer or knitting needle.

2.Pour half a glass of spirit vinegar onto the steam generator. Leave for a few minutes to work, then clean and rinse with water.

DO NOT use sponges, abrasive powder or descaler.

3.Dismantle the channel at the front of the oven (as shown in fig. 7) by pulling it upwards. Wipe it with a soft cloth and then replace, using the three notches provided.

Changing the light bulb (Fig. 8)

The bulb is in the back top right corner of the oven.

1.Turn the lamp cover slightly anti-clockwise.

2.Turn the bulb anti-clockwise.

3.Change the bulb and then replace the lamp cover ensuring

the cover is attached properly and the seals are positioned correctly.

The bulb is a Type E14 suitable up to 300°C, 25W, 220 – 240 V

Fig. 7

Fig. 8

13

Page 14
Image 14
CDA SV410 manual Cleaning and Maintenance, General Advice