Care and Maintenance
Symptom | Possible cause | Solution | |
|
|
| |
| Oven is not connected to power source | Check that the power source is working, | |
Your display does not light up | including the fuse | ||
Electronic board is not functioning | |||
| Call CDA Customer Care | ||
|
| ||
|
|
| |
Water or Steam leak around | The door is not properly closed |
| |
The water reservoir is not fully in | Call CDA Customer Care | ||
the door during cooking | |||
The door seal is defective |
| ||
|
| ||
|
|
| |
| Power supply problem | Check the power supply is working, including | |
The steam oven does not work | the fuse | ||
Fault in the electrical system | |||
| Call CDA Customer Care | ||
|
| ||
|
|
| |
The light in the oven cavity | Faulty light bulb | Replace the bulb | |
does not light up |
| ||
|
| ||
|
|
| |
There is residual water in the |
| Wipe down after use once the oven has | |
oven cavity, on the inner door | This is normal | ||
cooled with a cloth | |||
and the door seal |
| ||
|
| ||
|
|
| |
| The seal on the tank is faulty |
| |
The drip channel fills with | The seal on the door has come away from | Replace the seal | |
its support | Correctly insert the seal into its support | ||
water after every use | |||
The seal on the door is faulty | Call CDA Customer Care | ||
| |||
| The door is sloping |
| |
|
|
| |
The display shows no water | The water tank is empty | Fill the water tank | |
and the oven beeps | |||
The water tank is not fitted correctly | Replace the water tank correctly. | ||
| |||
|
|
|
In all cases, if you are unable to solve the problem yourself, then contact CDA Customer Care for assistance.
15
