Specifications**
Inputs | 4 A/V inputs (RCA) |
Input Signal Level |
|
Audio: | Up to 3 V |
Video: | 1 V |
Outputs | 5 A/V outputs |
| 1 Audio Output |
Output Signal Level |
|
Audio: | Up to 3 V |
Audio S/N ratio: | Greater than 60 dB |
Video: | 1 V |
Video S/N ratio: | Greater than 55 dB |
DC Input (Battery): | 10 – 16 VDC (Battery wire - 10 Amps Max) |
DC Input (Accessory): | 10 – 16 VDC (Accessory wire – 1 Amp Max) |
12 VDC Source Current Capability:
Input Source 1 through 4: 2 Amp Max each for Source Components (DVD, VCP etc.) *
Output Source 1 through 5: 1.5 Amps Max each for LCD screens, etc. *
*Each 12 VDC output jack is protected with an electronic fuse. If the current capability of the jack is exceeded, the fuse will open up. Remove the overload and wait 15 minutes for the fuse to reset. If it is necessary to supply more current than the output jack is rated, use an automotive relay. Wire the coil to the output jack and ground and hardwire the 12 V Accessory to the common terminal of the relay and wire the N.O. terminal of the relay to the load.
**Specifications subject to change without notice.
11
