Cecilware owner manual Operating the SDB45 System, Master Control Station MCS

Models: SDB45

1 12
Download 12 pages 57.96 Kb
Page 10
Image 10

6.Headset (3.5mm Headphone jacks)

These jacks provide connections for stereo headphones for private listening at each station. (Note: Plug the headphones in before putting the headphones on. Adjust the volume to a low level before putting the headphones on.)

Operating the SDB45 System

(With the OPTIONAL Master Control Station)

Master Control Station (MCS):

A.The master control station is used to turn the entire system on and off. In this configuration, Control Stations cannot be turned on or off without the master control station being turned on. (Note: Once the master control station is turned on, follow the direc- tions in the previous section for control station op- eration.)

B.The master control station also has a power but- ton that turns the FM modulator on and off.

C.In addition, the master control station has a source select button that allows the user to select which of the four inputs is routed through the vehicle sound system. There is also an IR eye that allows the user to control the source through the master control station.

10

D.The master control station’s Main Power button has three functions:

1.Power On – Press and release once to turn the system on.

2.Power Off – Press and hold for three seconds to turn the entire system off.

3.10 minute delayed turnoff – Press and re- lease once to enable the 10-minute delay (the Main Power LED will blink on and off to indi- cate that the SDB is in the delayed turnoff mode).

Note: For complete MCS operation see Owner's Manual included in the MCS kit.

Game Control Station (Optional)

The game control station is a set of RCA jacks that allow the user to plug in the audio/video outputs of a video game, camcorder, portable DVD or other audio/ video source into the SDB45 system. It provides a readily accessible A/V input without having to access the jacks on the SDB box.

Viewing a Video Source/Video Game Using the GCS To use the GCS, plug in the A/V source to the GCS RCA jacks, turn the source on and use the source se- lect button (S) on the control station to access the source to which the game control station is wired.

Page 10
Image 10
Cecilware owner manual Operating the SDB45 System, Master Control Station MCS, Game Control Station Optional