Operation Instruction
Continuous Shoot Mode
1.Press the Function button to select“
”shown on the LCD.
2.Press and hold the Shutter button within 5 seconds. Notes: Under the continuous shooting mode, the photos are all taken in QVGA mode and can be downloaded individually.
Taking 3 Photos Continuously
1.Press the Function button to select“
”shown on the LCD.
2.Hold down Shutter button within 5 seconds and it will take 3 photos continuously. And saved as jpg format.
Delete All Photos
1.Press the Function button to select the“
”icon shown on 
the LCD.
2.Press the Shutter button the LCD will flash. Press the Shutter Button again within 5 seconds to delete all the photos stored in the memory.
Delete Single Photos
1.Press the Function button to select the“ 
”icon shown on the LCD.
2.Press the Shutter button once within 5 seconds to delete the last photo.
Photo Resolution Selection
The resolution status will always show on the LCD display in small character.
1.Press Function button to select“Mode” character shown on LCD;
2.“ Hi” means VGA mode 640*480 pixels,“ Lo” means QVGA mode 320*240 pixels;
3.When you select Mode function, press the shutter button once to switch between the Hi mode and the Lo mode.
Image Compression / Processing Mode Shift:
1.Press Function button to select the icon 
shown on LCD.
2.Press the shutter button within 5 seconds to shift between Compression(Hd) and ordinary mode(Ld).
Fluorescent Lamp Frequency Selection
1.Press the Function button to select the“ 60” icon shown on the LCD.
2.Press the Shutter button within 5 seconds to switch the icon
“60” to“ 50” .
Tips:“ 60” means you are in 60HZ; If you press shutter button, you will switch to 50HZ. Generally speaking, there is 60Hz fluorescent lamp frequency used in United States, Asia. And 50Hz used in Japan and Europe.
