MAINTENANCE | ||
|
|
|
SAFETY PRECAUTIONS
WARNING
ELECTRIC SHOCK can kill.
• Have an electrician install and serv- ice this equipment.
•Turn the input power off at the fuse box, disconnect supply lines and allow machine to sit for five minutes minimum to allow the power capaci- tors to discharge before working inside this equipment.
•Do not touch electrically hot parts.
ROUTINE MAINTENANCE
The frequency of the maintenance operations may vary in accordance with the working environment. Any noticeable damage should be reported immedi- ately.
•Check cables and connections integrity. Replace, if necessary.
•Clean the power source inside by means of low - pressure compressed air.
•Keep the machine clean. Use a soft dry cloth to clean the external case, especially the airflow inlet / outlet louvers.
WARNING
Do not open this machine and do not introduce any- thing into its openings. Power supply must be discon- nected from the machine before each maintenance and service. After each repair, perform proper tests to ensure safety.
CAUTION
Power supply must be disconnected from the machine before each maintenance and service. Always use gloves in compliance with the safety standards.
