Carton Inventory
Your garage door opener is packaged in two cartons which contain the motor unit and the parts illustrated below. Note that accessories will depend on the
model purchased. If anything is missing, carefully check the packing material. Parts may be stuck in the foam. KEEP THE FOAM INTACT (see page 6.)
LOCK
LIGHT
Motion Detecting Door Control Panel
| Y |
| NL |
| T O |
| UN |
G | MO |
ILIN |
|
CE |
|
| UP |
Remote Control Transmitter Visor Clip
Motor Unit with Light Lens
SECURITY✚® | Belt Cap Retainer |
| Styrofoam |
| |
White & White/Red |
|
Header Bracket
Door Bracket
Curved Door
Arm Section
Trolley
Belt
Pulley Bracket
Rail Grease | Safety Sensor | |
Bracket (2) | ||
|
Belt
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye) with
Straight Door
Safety LabelsArm Section and
Literature
Hardware Inventory
INSTALLATION HARDWARE | Lock Washer 5/16" (4) |
Hex Screw #8x3/8" (3) | Screw |
Hex Bolt | Screw |
Lag Screw | Insulated Staples (30) |
Lag Screw | Ring Fastener (3) |
Handle | |
Clevis Pin | Drywall Anchors (2) |
Clevis Pin | Rope |
Clevis Pin 5/16"x1" (1) | Carriage Bolts |
Nut | Wing Nut 1/4"x20 (2) |
5