SPECIFICATIONS
Max. Pull Force | 800N |
Rated Power | 400 W |
| Motor |
Type | Permanent split capacitor |
Speed | 1500 rpm |
Volts | |
Noise level | 60dB |
| Drive Mechanism |
Gears | 16:1 worm gear reduction |
Drive | Chain with |
| steel rail. |
Length of Travel | Adjustable to 2,3m |
Travel Rate | |
Lamp | On when door starts, off |
| after stop. |
Door Linkage | Adjustable door arm. Pull cord trolley |
| release. |
| Safety |
Personal | Push button stop in UP and DOWN |
| direction. Automatic force reversal in UP |
| and DOWN direction. |
Electronic | Automatic force adjustments. |
Electrical | Motor overload protector and low voltage |
| push button wiring. |
Limit Device | Circuit actuated by limit nut. |
Limit Adjustment | Screwdriver adjustment on side panel. |
Start Circuit | Low voltage push button circuit. |
| Dimensions |
Length (Overall) | 3,1m |
Headroom Required | 30mm |
Hanging Weight | 14,5 kg (32 lb) |
| Receiver |
Memory Registers | 8 |
Keypad Code Memory.... | 1 |
SPECIAL NOTE: Chamberlain strongly recommends that the protector system be installed on all garage door openers.
10
