Menu Operation

1.Use the On Screen Display MENU to regulate the picture’s quality.

2.Different operating languages are available.

3.The display time for the menu ranges from 3~60 seconds. This can be adjusted in the General Setting menu.

4.Use the Panel buttons or the Remote Control to operate the OSD MENU.

FUNCTION INTRODUCTION

1)Press【MENU】and then use【V+】/【V-】to select the Channel Setting menu in TV mode.

2)Use 【P+】/【P-】to select the desired field.

Current Channel

Press 【V+】/【V-】to increase/decrease the channel number.

Channel Label

Press【OK】to enter the edit mode.

Press【P+】/【P-】to select the desired letter, press【V+】 /【V-】for next operation.

Color System

Switch among PAL, SECAM and AUTO systems.

Sound System

Switch among B/G, I, D/K, L and AUTO systems.

Skip

After Auto Search, there may be some repeated programs stored. Skipping the repeated programs can shorten the program selection.

1.Press【P+】/【P-】to search for the Program skipped.

2.Input the channel number directly to resume the Program Number skipped.

Auto Search

In the Channel Setting Menu, press 【P+】/【P-】to select Auto Search and press 【OK】/【V+】 to start Auto Searching mode.

1.During searching, the sound and color systems are automatically adjusted and programs are stored.

2.When search is finished, all 100 channels are stored, or 【MENU】is pressed during

the search process, the search will automatically stop and go to the channel setting menu with channel 0.

Note: During searching, if channel information detected, there will be an OSD, we can Install the channel information by the hint.

PAGE 13