Changhong Electric W270F8E, W320F8E, W370F8E manual Recall, Zoom Mode, Still, PIP/POP/PBP Function

Recall

In TV mode, press【RECALL】to return the previous channel or the previous signal source.

Zoom Mode

Switch between Fill screen, 4:3, Wide, Cinema and Subtitle.

Still

Press【STILL】to freeze or activate the current image.

PIP/POP/PBP Function

Press to enter into or exit from the sub-picture mode.

1.Press to choose sub-picture signal source of TV, AV, AV1, AV2, YPbPr, PC and DVI.

2.Press to choose the sub-picture mode of PIP, PBP and POP.

●Mode 1: To overlap a sub-picture (PIP) in small size

●Mode 2: To place two pictures of the same size side by side. Both main picture and sub-picture (PBP) cover half of the display screen area.

●Mode 3: A main picture covers 12/16 area of the display screen while a sub-picture (POP) covers 1/16.

3.Press to switch between the main picture and sub-picture.

4.Press to freeze or continue the program of the current sub-picture.

5.Press to adjust the sub-picture position.

To switch the sub-picture’s channels while in TV mode, pressing 【CH+】/【CH-】.

The sub-picture can enter into TV mode directly by pressing【CH+】【/ CH-】in other modes.

The below table illustrates the possible combination of different modes when in PIP/POP/PBP Function.

Main Pic
Sub Pic	TV	AV(CVBS)	AV(Y/C)	AV1(CVBS)	AV1(RGB)	AV2(CVBS)	AV2(Y/C)	PC	DVI	YPbPr
TV	●	●	●	●	●	●	●	●	●	●
AV(CVBS)	●	●		●	●	●	●	●	●	●
AV(Y/C)	●		●	●	●	●	●	●	●	●
AV1(CVBS)	●	●	●	●		●	●	●	●	●
AV1(RGB)	●	●	●		●	●	●		●
AV2(CVBS)	●	●	●	●	●	●		●	●	●
AV2(Y/C)	●	●	●	●	●		●	●	●	●
PC	●	●	●	●	●	●	●	●	●
DVI	●	●	●	●	●	●	●	●	●	●
YPbPr	●	●	●	●	●	●	●		●	●

Note: All buttons mentioned in this operation are on the remote control, signs of “●” mean that both pictures can be displayed at the same time and the blanks mean that both modes can not be displayed at the same time.

PAGE 20