Yamaha RX-V863 66 En, All Channel Search mode, Category Search mode, Preset Search mode

SIRIUS Satellite Radio™ tuning

Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 4SIRIUS.

■All Channel Search mode

1Press BSEARCH MODE (or ISRCH MODE) repeatedly to select “ALL CH

SEARCH”.

2Press EPRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to search for a channel within all channels.

y

•You can search for a channel quickly by pressing and holding

EPRESET/TUNING/CH l/ h(or 8PRESET/CH k/ n).

•You can skip channels to the previous or next category by pressing DCATEGORY (or 8A-E/CAT.l/ h).

■Category Search mode

1Press BSEARCH MODE (or ISRCH MODE) repeatedly to select “CAT SEARCH”.

2Press DCATEGORY (or 8A-E/CAT.l/ h) repeatedly to change the channel category.

3Press EPRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to search for a channel within the selected channel category.

y

You can search for a channel quickly by pressing and holding

EPRESET/TUNING/CH l/ h(or 8PRESET/CH k/ n).

Note

This unit skips the channels when this unit is All Channel Search mode or Category Search mode in the following cases (it is not malfunction of this unit):

–the channel is locked (see page 67).

–the channel is out of service.

–you do not subscribe to the channel.

■Preset Search mode

Prior to selecting a preset channel in the Preset Search mode, you must preset SIRIUS channels. For details, see “Setting the SIRIUS Satellite Radio™ preset channels” on page 67.

1Press BSEARCH MODE (or ISRCH MODE) repeatedly to select “PRESET

SEARCH”.

2Press DCATEGORY (or 8A-E/CAT.l / h) repeatedly to change the preset channel group (A to E).

3Press EPRESET/TUNING/CH l / h (or

8PRESET/CH k / n) repeatedly to change the preset channel number (1 to 8).

y

You can also select the preset channel number directly by pressing the numeric buttons (1 to 8) (6).

■Direct number access mode

1Press ISRCH MODE on the remote control repeatedly to select “ALL CH SEARCH” or “CAT SEARCH”.

2Press the numeric buttons (6) to enter the desired three-digit channel number.

For example, to enter the number 123, press the numeric buttons (6) as shown below.

1 2 3

y

•To display the Sirius ID number displayed in the front panel display, select channel “0”.

•To enter a one-digit or two-digit channel number, press the numeric buttons (6) on the remote control and then press HENT to confirm the input number.

•Instead of pressing HENT to tune into the channel immediately, you can wait a few seconds until this unit confirms the entered channel number.

•If no button is pressed within a few seconds after you enter a one-digit or two-digit number, this unit automatically confirms the entered channel number.

•If the selected channel is locked, “PIN:___” appears in the front panel display. Enter the four-digit Parental Lock code number by using the numeric buttons (6) or press HENT to cancel (see page 67).

66 En