DSP A B indicators
Light up according to the set of front speakers activated (see page 43).
SP A: The FRONT A speakers are activated.
SP B: The FRONT B speakers are activated.
SP A B: The FRONT A and FRONT B speakers are activated.
EZONE2 indicator
Lights up when Zone 2 is turned on (see page 107).
FDSP indicators
The respective indicator lights up when any of the sound field programs are selected (see page 48).
CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound field program (see page 48).
VIRTUAL indicator
Lights up when the Virtual CINEMA DSP mode is active (see page 51).
SILENT CINEMA indicator
Lights up when headphones are connected and a sound field program is selected (see page 51).
G
Shows the name of the current sound field program and other information when adjusting or changing settings.
HSLEEP indicator
Lights up while the sleep timer is on (see page 47).
IInput channel and speaker indicators
LFE indicator
LFE | Presence speaker indicators |
| |
L C R |
|
SL SB SR | Input channel indicators |
|
SBL SBR
Input channel indicators
•Indicate the channel components of the current digital input signal.
•Light up or flash according to the settings of the speakers when this unit is in the automatic setup procedure (see page 32) or in the “BASIC MENU” in “MANUAL SETUP” (see page 89).
Presence speaker indicators
Light up or flash according to the setting of “EXTRA SP ASSIGN” when this unit is in the automatic setup procedure (see page 32) or in the “BASIC MENU” in “MANUAL SETUP” (see page 87).
y
You can make settings for the presence and surround back speakers automatically by running “AUTO SETUP” (see page 32) or manually by adjusting settings for “SUR.B L/R SP” (see page 88) in “SPEAKER SET”.
Connections
Using the remote control
The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
Remote control sensor
Approximately 6 m (20 ft) | 30 | 30 |
Infrared window (1)
Outputs infrared control signals. Aim this window at the component you want to operate.
BTRANSMIT indicator
Flashes while the remote control is sending infrared signals.
Operation mode selector (F)
The function of some buttons depends on the operation mode selector position.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input selector button (see page 103).
TV
Operates the TV assigned to either 4DTV/CBL or 4PHONO (see page 102).
Notes
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–places of high humidity, such as near a bath
–places of high temperatures, such as near a heater or stove
–places of extremely low temperatures
–dusty places
•To set the remote control codes for other components, see page 104.
PREPARATION
English
