Customizing this unit (MANUAL SETUP)
Using SET MENU
Use the remote control to access and adjust each parameter.
y
•You can change the “SET MENU” parameters while this unit is reproducing sound.
•If you press RPARAMETER during the “SET MENU” operation, the “SET MENU” operation is canceled.
•Press 9RETURN to return to the previous menu level.
1Set the operation mode selector to FAMP and then press ISET MENU to enter “SET
MENU”.
The top “SET MENU” display appears in the OSD.
2Press 8k / n to select “MANUAL SETUP”.
SET MENU
;AUTO SETUP
. ;MANUAL SETUP ;SIGNAL INFO
[[ | p | Up/Down |
[ENTER]: Enter
3Press 8ENTER to enter “MANUAL SETUP”.
The “MANUAL SETUP” display appears in the OSD.
MANUAL SETUP
. 1 BASIC MENU 2 VOLUME MENU 3 SOUND MENU 4 INPUT MENU
5 OPTION MENU
[[ | p | Up/Down |
[ENTER]: Enter
4Press 8k / n repeatedly and then press
8ENTER to select and enter the desired menu.
The following displays are examples where “SOUND MENU” is selected.
3 SOUND MENU
. A)EQUALIZER
B)LFE LEVEL C)DYNAMIC RANGE D)LIPSYNC E)EXTD SUR.
[[ | p | Up/Down |
[ENTER]: Enter
5Press 8k / n repeatedly and then press 8ENTER to select and enter the desired
submenu.
The following display is an example where “LFE LEVEL” is selected.
B)LFE LEVEL
. SPEAKER;;;;;;0dB
[[ | p | Up/Down |
[p]/[[]: Adjust
6Press 8k/ nto select the desired parameter and then 8l / h to change the parameter settings.
•Press 8hto increase the value.
•Press 8lto decrease the value.
7Press ISET MENU to exit from “SET
MENU”.
