Resetting the system
Use this feature to reset all the parameters of this unit to the initial factory settings.
Notes
•This procedure completely resets all the parameters of this unit including the “SET MENU” parameters.
•The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press LSYSTEM OFF on the front panel.
1Press LSYSTEM OFF on the front panel to set this unit to the standby mode.
2Press and hold MTONE CONTROL and then press KMAIN ZONE ON/OFF to turn
on this unit.
This unit turns on, and the advanced setup menu appears in the front panel display.
TONE CONTROL While holding down
MAIN ZONE
ON/OFF
3Rotate the NPROGRAM selector to select “INIT”.
4Press MTONE CONTROL repeatedly to select “ALL”.
y
Select “CANCEL” to cancel the initialization procedure without making any changes.
5Press LSYSTEM OFF to confirm your selection and set this unit to the standby mode.
