Yamaha RX-V863 owner manual 108 En, Controlling Zone 2 with the remote control, Notes

Using multi-zone configuration

Operate the following operations after activating the Zone 2 operation mode.

Operating Zone 2

Rotate the RINPUT selector to select the desired input source while the ZONE2 indicator is flashing in the front panel display.

•Select “TUNER” as the input source to use the TUNER features in Zone 2. For details about the TUNER operations, see “FM/AM tuning” on page 53.

•Select “XM” as the input source to use the XM Satellite Radio features in Zone 2. For details about the XM Satellite Radio operations, see “XM Satellite Radio tuning” on page 59.

•Select “SIRIUS” as the input source to use the SIRIUS Satellite Radio features in Zone 2. For details about the SIRIUS Satellite Radio operations, see “SIRIUS Satellite Radio™ tuning” on page 64.

•Select “V-AUX” as the input source to use iPod features or Bluetooth features in Zone 2. For details about the iPod operations, see “Using iPod™” on page 70 or “Using Bluetooth™ components” on page 72.

Set Zone 2 to the standby mode

Press HZONE 2 ON/OFF to set Zone 2 to the

2Press the numeric buttons (6) to enter the code number “9992”.

PROG		ENHANCER	SUR. DECODE
1	2	3	4
STRAIGHT	PURE		PARAMETER	TRANSMIT
5	6	7	8
MULTI CH IN	AUDIO SEL			Flashes
9	0

■Controlling Zone 2 with the remote control

Turning on Zone 2

Press and hold DPOWER or CSTANDBY and then press 4 to set the remote control to the Zone 2 mode.

•Press DPOWER when the main zone is turned on.

•Press CSTANDBY when the main zone is turned off.

The BTRANSMIT indicator on the remote control lights up while the remote control is set to the Zone 2 mode.

POWER	While holding
	down
or	TRANSMIT
	PHONO

standby mode.

y

Press LSYSTEM OFF to set the main zone and Zone 2 to the standby mode simultaneously.

STANDBY

Notes

Lights up

■Setting the remote control to the Zone 2

mode

The remote control is originally set to the main mode to control the main zone. To control Zone 2 with the remote control, you must first set the remote control to the Zone 2 mode.

1Press 2CODE SET using a ballpoint pen or a similar object.

The BTRANSMIT indicator on the remote control flashes twice.

TRANSMIT

CODE SET TRANSMIT

POWER POWER STANDBY POWER

TV AV

Flashes

•When the remote control is set to the Zone 2 mode,

DPOWER, CSTANDBY, EVOLUME +/–,GMUTE, and the input selector buttons (4) are set to control Zone 2. However, the rest of the remote control buttons remain in the main mode.

•The remote control automatically exits from the Zone 2 mode in the following cases:

–when you do not make any operations within 10 seconds after the remote control is set to the Zone 2 mode.

–when you press a remote control button other than

DPOWER, CSTANDBY, EVOLUME +/–,GMUTE, the

ASCENE buttons and the input selector buttons (4).

Activating the Zone 2 operation mode

Press DPOWER to turn on Zone 2.

Operating Zone 2

Press one of the input selector buttons (4) to select the desired input source of Zone 2.

Setting Zone 2 to the standby mode

Press CSTANDBY to set Zone 2 to the standby mode.

108 En