Changhong Electric W270F8E, W320F8E, W370F8E manual Using the Picture Setting Menu

Manual Search

In TV mode, select Manual Search option and press 【OK】/【V+】to enter into Manual Search . Use 【V+】/【V-】to search programs within high or low frequency. After searching, the TV will automatically store receivable channels and return to the menu.

Fine

When the picture and sound of a channel are not satisfactory after Auto Search or Manual Search, Fine function can be used to adjust the

pictures and sound.

1.In TV mode, select Fine and press【OK】/【V+】 to enter the Fine tuning mode. 2.Press【V+】/【V-】to increase or decrease the frequency value for fine-tuning.

Note: During auto search, manual search, and fine-tune operation, a password needs to be entered if any program is locked.

Channel Table

Two kinds of program list, Air & Cable, can be chosen. 2~69 for Air list and 1~125 for Cable list.

Note: This function is for U.S.A users only.

Auto Scan

In TV mode, select Auto Scan to activate the scan mode. All pictures will be displayed in the current channel. The current program will be displayed in the middle of the screen, with twelve small pictures around the middle picture. All pictures are scanned, beginning with the current program, from the upper-left side screen in clockwise direction. Use 【P+】/【P-】and【V+】/【V-】to select the desired channel; Use 【OK】to exit from the Auto Scan mode and watch only the selected channel. Use【MENU】to exit from the Auto Scan mode directly. Note: There will be a stripe blank on the right side screen during Auto Scan, this situation is normal, for it is to better the viewing

proportion(only for 32″, 37″LCD TV).

Exchange

In TV mode, select Exchange to enter the PBP mode.

Press【V+】/【V-】to switch between the main picture & sub-picture.

Press 【P+】/【P-】or the number buttons to select between the channel 1& channel 2.

Press【OK】to switch between the programs.

Using the Picture Setting Menu

1)Press【MENU】and then use 【V+】/【V-】to select the Picture Setting menu.

2)Press【P+】/【P-】to select the desired field.

PAGE 14