ASSEMBLY

FIRST, GET A HELPER! This unit is heavy and requires a second person for lifting and moving. NEXT, pick a suitable

1 location to work. Open the carton and slit the corners so that the carton lays flat. This will give you a protective surface during assembly.

Attach leg supports to smoker chamber using two 1/4-20 X 1-3/4”screws and two 1/4-20flange nuts on each side.

Finger tighten screws and nuts until after next step.

Smoker

Chamber

Leg

Supports

1/4-20 Flange Nut

1/4-20 X 1-3/4

Screws

2

Lay unit on smoker chamber.

Insert legs into leg supports making sure holes align and the legs with caps are at the chamber side opening.

Attach leg brace on each side using four 1/4-20 X 1-3/4”screws and four 1/4-20flange nuts per brace.

Finger tighten all screws and nuts in this step until all are in place. Once all in place, then fully tighten all screws and nuts. Go back and fully tighten screws and nuts in step 1.

Right

Left

Legs

Legs

with Holes

with Caps

1/4-20

1/4-20 X 1-3/4

Flange

Screws

Nut

 

Leg

 

Brace

 

Leg

Brace

Leg

Supports

Page 8

Page 8
Image 8
Char-Broil 10201595 manual Assembly, Leg Brace Supports