Char-Broil 10201595 manual Hitch Pin, Wheel, Legs with holes Axle, Firebox

3

Hitch Pin

• Slide axle into holes at ends of legs (legs	Hitch Pin
without end caps).	Wheel
• Attach wheels onto axle rod using hitch	Axle	Wheel
pins. Hitch pins insert through hole in axle
as shown in box A.

Check to be sure that all screws and nuts used so far are fully tightened.

Legs with holes

Axle Hitch Pin

4

Figure B

•Pre-assemble the Firebox Lid and the Firebox Bottom using eight #6-32 X 3/8 Screws as shown in figure A.

•Place the firebox onto the smoker chamber and align the large openings.

•Insert eight #10-24 X 1/2” screws through the smoker chamber, into the firebox. Secure with eight #10-24flange nuts as shown in figure B.

Fully tighten all screws and nuts.

Firebox Lid	Figure A
Eight
#6-32 X 3/8
Screws

Firebox

	Eight
	#10-24
Smoker	Flange
	Nut

Chamber

Eight

#10-24 X 1/2

Screws

Firebox Bottom

Page 9