Flame tamer
Pull out the knobs from control panel. Insert temperature gauge stem into the biger hole above knob bezel,shown A. Make the temperature gauge attached on the panel. Push the temperature gauge downward till it clips on the panel, shown B/C. Re-install the knobs.
Temperature gauge stem
A
18
Temperature gauge
Control panel | Knob bezel |
|
Knob
B
Back of the panel
C
19
Install flame tamers by sliding one end of each flame tamer into slots at front of firebox and resting opposite end on pins in back of firebox.
Pin 
Slide into slots
22
