The shoulder padding can be turned over at the top so that the shoulder strap can be sufficiently shortened.
Insert the crotch harness from the rear through the slot in the baby seat in front of the flap for the padding.
For side fitting, use the two fasteners of the appropriate side and for centre fitting, the two in the centre.
If necessary, the lower connecting strap of the shoulder padding can also be unstrapped and the shoulder padding turned over there as well.
Then insert the fastnex insert through the elastic loop at the end of the flap for the padding.
Note:
(See also Chariot Owner’s Manual.)
For all other children, the shoulder strap can be drawn through the upper flaps of the padding to prevent the padding being able to slip to the side.
The safety belt can now be fastened as described in the Chariot Owner’s Manual.
Please note:
Make sure you check all belt buckles are tight!
1.2.3.2 On standard models
Insert the crotch harness from | Insert the ring through the |
the rear through the slot in the | elastic loop at the end of the |
baby seat in front of the flap | flap for the padding. |
for the padding. |
|
Insert the shoulder harness that is on the appropriate side of the baby seat through the lower or upper slot, depending on the size of the child.
20
