2. Fitting the Baby Seat to a Single Seater Chariot CTS
2.1 Fitting the D-rings
When fitting the D rings it helps to fold up the basic unit so as to slacken off the fabric cover.
Location of the drilled holes at the front in the side frame tube.
To attach the D rings the machine bolts and nylok nuts are needed.
Insert the bolt with the D ring through the hole in the side frame tube so that the
D ring lies on top on the tube.
Fit the second D ring on the other side in the same way.
Screw on the nylok nut and tighten it using a Philips crosshead screwdriver and an 11mm spanner.
2.2 Securing the Baby Seat
2.2.1 Preparing the safety belts
See Section 1.2
2.2.2 Securing the baby seat to the trailer seat
Connect the fastex buckles of the baby seat with their counterparts on the lap belt.
The baby seat is properly fitted if the side of the flap for the crotch harness padding that is attached to the baby seat points towards the front of the trailer. (See illustrations in Section 1.2.2.)
Experience has shown that it helps if the overall belt length adjustment is made to about 15 or 16cm.
23
