1.2 Handlebar Instructions
Insert both ends of the handlebar into the aluminum sleeves located at the upper rear section of the carrier.
WARNING: Failure to properly install the handlebars or use the wrist safety strap could cause the carrier to become separated from you resulting in serious injury.
Depress both spring buttons and insert the handlebars fully into the sleeves. Both spring buttons must “pop” out of the holes located on the inner side of the sleeves to secure the handlebar in place.
(CX model only)
Secure the front of the handlebar bag to the clip on the back of the carrier’s cover. Wrap the two web strap on the back of the bag around the carrier’s handlebar and secure them using the clips.
CAUTION Do not place more then 0.5kg/1 lb in the handlebar bag. when used on the carri- er. Overloading this bag can cause the carrier to tip.
1.3 Weather Cover Features
Attach the loops from the back corner of the | Fasten the front corners of the weather cover |
weather cover over the aluminum sleeves | to the Velcro tabs located on the front lower |
located at the upper rear section of the carrier. | corners of the frame. |
Note: Your Chariot Carrier has climate control features designed to regulate your child’s temperature. Periodically monitor your child to ensure that he/she is comfortable in terms of temperature.
WARNING: Failure to use the weather cover could expose your child to flying rocks, insects, and other debris.
RAIN COVER
ELASTIC LOOP
BACK PANEL
During cooler temperatures use the rain cover to keep your child warmer. For more ventilation, roll up the rain cover and secure it by looping the elastic loops around its ends. If it is bright outside or the sun is bothering your child, use the back panel as a sunscreen. To do so, remove the weather cover, flip the back panel over the front of the carrier, secure it to the Velcro tabs located on the upper frame, and
5
