STROLLING CTS KIT (wheels only)
2.0 Installation |
|
|
| 2.1. Storage |
|
|
|
|
|
|
|
|
|
|
Push the button located on the side of the wing as far in as possible. This will create an opening for the caster shaft.
WARNING:
While maintaining the button depressed, slide the stroller caster from the buttom up into the carrier’s wing. When fully inserted, release the button and it should return to its locked position. To make sure the caster is secured, test by trying to pull the caster down.
To store the wheels on the carrier when using another conversion kit, turn the wheel assembly upside down angled towards the back of the carrier. While maintaining the button depressed, slide the wheel down into the opening, then release the button once fully inserted.
Overloading the carrier with more than 2.2 lb (1 kg) in the rear storage pouches can make the carrier unstable.
Failure to properly attach wheels could cause the wheels to fall off, resulting in an accident and serious injury.
Direct impacts against the pivoting stroller wheels could cause damage to the wheel arm attachment brackets.
The following safety precautions should be followed, otherwise injury or death to you or to your passengers could result:
–Use wrist safety strap at all times.
–Always use seat belts.
–Always use parking brake when stroller is stationary.
–Never
–Never climb or descend stairs with the stroller.
–Use extreme caution on hills.
13
