EN |
| STRIKE™ 882 QRG |
Replacing the | 1. | Disconnect this product from power. |
Fuse | 2. | Using a Flat head screwdriver, unscrew the fuse holder cap from the |
|
| housing. |
| 3. | Remove blown fuse and replace with a good fuse of the same type |
|
| and rating. |
| 4. | Screw the fuse holder cap back in place and reconnect power. |
DMX Linking | The STRIKE™ 882 will work with a DMX controller using a regular DMX | |
| serial connection. A DMX Primer is available from www.chauvetpro.com. | |
DMX Connection | The STRIKE™ 882 uses a regular DMX data connection for its DMX | |
| personalities: 1 Ch, 5 Ch, 6 Ch, and 10 Ch. See the User Manual to connect | |
| and configure for DMX operation. | |
Master/Slave | The STRIKE™ 882 uses the DMX data connection for its Master/Slave mode. | |
Connection | See the User Manual to connect and configure for master/slave operation. | |
Mounting |
|
|
|
| Clamp |
|
| (Model |
Product
Mounting
Diagram
Overhead Mounting | Floor Mounting |
Control Panel
Description
Button | Function |
|
<MENU> | Exits from the current menu or function |
|
<ENTER> | Enables the currently displayed menu or sets the |
|
currently selected value into the selected function |
| |
|
| |
<UP> | Navigates upwards through the menu list and |
|
increases the numeric value when in a function |
| |
|
| |
<DOWN> | Navigates downwards through the menu list and |
|
decreases the numeric value when in a function |
| |
|
|
3