3)Tap the MIDI/Rec button.
4)Use BANK and BANK buttons to select the bank to copy to.
5)Tap the Music/Bankcopy button to execute the copy.
6)To exit programming mode press the Program button until the LED turns off.
Chase Programming
Operating Instructions
All LEDs wil flash three times to confirm process.
A chase is created by using previously created scenes. Scenes become steps in a chase and can be arranged in any order you choose. It is highly recommended that prior to programming chases for the first time; you delete all chases from memory. See “Delete All Chases” for instructions.
CR E AT E A C H ASE
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
Action
7)Press the Program button until the LED blinks.
8)Tap the Chase button you wish to program.
9)Change BANK if necessary to locate a scene.
10)Select the scene to insert.
11)Tap the MIDI/Rec button to store.
12)Repeat steps 3 ~ 5 to add additional steps in the chase.
Notes
IN SERT I NG A B AN K OF SC EN ES INT O A C H ASE
Action
1)Pres the Program button until the LED blinks.
2)Tap the Chase button you wish to program.
3)Use BANK and BANK buttons to select the bank of scenes to copy.
4)Tap the Music/Bankcopy button to execute the copy.
5)Tap the MIDI/Rec copy button to confirm, all LEDs will flash three times.
Notes
13 |
