DEL ET E AL L C H ASE S
Action
1)With the power off, press and hold the AUTO/Del and BANK buttons.
2)Turn controller back on and all chases will be cleared.
Playback (Scenes)
M ANU AL R UN SC EN E
Operating Instructions
Notes
When power is first turned ON, the controller will be in manual scene mode.
Action
1)Make sure neither Music nor Auto LEDs are on.
2)Select the program BANK that stores the scene you want to run manually by using the BANK UP/DOWN.
3)Press the SCENE button to run.
Notes
If by chance you are in programming mode you can also press and hold the PROGRAM button until the Program LED goes off.
RU NN ING I N SO UN D - M ODE
Action
1)Press the Music/Bankcopy button until the Music LED turns on.
2)Change BANK programs by using BANK UP/DOWN buttons if necessary.
3)Press the Music/Bankcopy to exit.
Notes
In the Sound mode, programs will be triggered by the sound using its
RU NN ING I N AU T O - M OD E
This mode allows you to run a bank of programmed scenes in sequence.
Action
1)Press the AUTO/Del button until the Auto LED turns on.
2)Change BANK programs by using BANK UP/DOWN buttons if necessary.
3)You can adjust the time between steps by moving the SPEED fader and the duration of the step by moving the FADE TIME fader.
4)Use the TAP/Display button to set the speed instead. The time between two sequential taps sets the speed.
5)Press the AUTO/Del button to exit mode.
Notes
In the Auto mode, programs will be triggered by controllers fade and speed time as set on the faders. All scenes in a Bank will chase.
CAUTION! The fade setting should never be slower than the speed setting or the scene will never complete execution.
These settings will stay until the speed slider is moved.
BL AC KO UT
The Blackout button brings all lighting output to 0 or off.
15 |
