Operating Instructions
SC EN E PROG R AM M ING
ENT ER ING PRO GR AM M ING M ODE
1)Press the Program button until the LED blinks.
CR E AT E A SC EN E
A scene is a static lighting state. The
Action | Notes | |
1) | Press the Program button until the LED | Deselect Blackout if LED is lit. |
| blinks. |
|
2) | Position SPEED and FADE TIME |
|
| sliders all the way down. |
|
3) | Select the SCANNERS you wish to | You can select more than one fixture. |
| include in your scene. |
|
4)Compose a look by moving the sliders You can access channels 9~16 by pressing the Page
and joystick. | Select button. This is necessary for fixtures that use |
| more than 8 channels of control. |
5) Choose BANK. | There are 8 scenes available in every bank. |
6)Tap MIDI/Rec button.
7)Select a SCENES button to store.
8)Repeat steps 3 through 7 as necessary.
9)To exit program mode, hold the MODE button and press FINE.
Shortcut: {Programming Fixtures} Press [Save] Select [Button 1~24] to store to memory
SC EN E EDIT
Action
1)Press the Program button until the LED blinks.
2)Use BANK and BANK buttons to change banks.
3)Tap the scene to edit within the bank.
4)Follow”steps 2 through 4 from “Create a Scene
5)Tap MIDI/Rec button.
6)Tap the same scene number originally selected on step 3.
Notes
Deselect Blackout if LED is lit.
Remember this scene number!
Scene edit works by overriding a scene.
11 |
