Standalone
This fixture has preprogrammed operating modes. These are accessed via the DIP switches on the back of the fixture.
DIP switch [10] must be OFF in this mode.
Please see the chart below for further explanation.
Mode | DIP switches |
Water effect rotating, color rotating | 1 = ON |
Water effect static, color rotating | 2 = ON |
Water effect rotating, color static | 3 = ON |
Water effect static, color static | 4 = ON |
The DIP switches will not work together. Only use one out of the 4 modes listed above!
If you desire a specific static color, such as yellow, then switch the unit into a mode where the color wheel is moving. When the color wheel rotates to the desired color, switch the fixture into a mode that does NOT have the color wheel moving. (DIP switch [1] or [2])
DMX Channel Values
| CHANNEL | VALUE | FUNCTION | |
1 |
| Dimmer | ||
000 Ù 255 | 0%~100% |
| ||
|
|
| ||
|
|
| Control |
|
| 2 | 000 Ù 063 | Water effect rotating, color rotating |
|
| 064 Ù 127 | Water effect static, color rotating |
| |
|
| 128 Ù 191 | Water effect rotating, color static |
|
|
| 192 Ù 255 | Water effect static, color static |
|
|
|
|
|
|
4. Operating Instructions | 9 | 11/10/2010 3:19 PM |
