Chapter 2 – Activation and Installation

Chapter 2 – Activation and

Installation

Step 1 – Activate Your Wireless Account

Pre-Configured Multi-Tech Products

Each Multi-Tech wireless product has been pre-configured to operate on a wireless network.

Activate Your Wireless Account

Please see the wireless account Activation Notices located on the MultiModem CD. Choose the one for your wireless network provider and follow the directions to activate your account.

Phone Numbers for the Wireless Modem

Every wireless modem will have its own unique phone number. The phone number may simply be given to you by your wireless service provider or it may be on the SIM card or both. Wireless provider implementations may vary.

Step 2 – Insert the SIM Card into the Holder

The wireless MultiModem requires the power supply connection to begin operation. It also requires a SIM card (Subscriber Identity Module) to operate on a GSM network. To install the modem, do the following:

1.Using your fingernail or a small wedging tool (e.g., a small screwdriver), pry off the SIM cover.

2.Insert the SIM card into the holder.

3.Verify that the SIM card fits into the holder properly and then replace the cover.

Multi-Tech Systems, Inc. MultiModem GPRS Wireless Modem User Guide

9

Page 9
Image 9
Multi-Tech Systems F2 manual Activation Installation, Activate Your Wireless Account, Insert the SIM Card into the Holder