Only For Qualified Installers
5
Reinstall burner module back into the stove with the four bolts that were removed. Check gasket for damage and replace if necessary. Check for gas leaks when finished.
INSTALLATION15
Note: The higher the orifice number the smaller hole in the tip. For example, a number 52 orifice has a larger hole than a number 60 orifice.
6
Place conversion sticker (provided in Kit) on the valve. This is to permanently mark the valve that it has been converted to Natural Gas. This label is important in the event that the valve is ever removed and mixed in with other valves.
7
Mark the proper box on the label with a permanent marker. Note: If no conversion is made, the box for the propane box must still be marked by the installer.
9
Verify gas inlet and manifold pressures are within the specifications on the appliance data plate located inside the bottom of the unit.
